Turbine air classfiers have the following advantages:
• Exact and simple setting of cut point by variation of rotor speed.
• Constant classification results, regardless of feed rate variations.
KEY FEATURES
The special design of Bauermeister turbine air classifier has the following advantages:
• Explosion pressure shock proof up to 10 bar overpressure.
• Simple, robust design, with direct drive of the classification wheel.
• Modified design of classification wheels provides a wide range of cut points.
• The pneumatic seal between classification wheel and housing guarantees grit-free fine product.
• Streamlined component design ensures minimal pressure drop, rendering the classifier suitable for use with sensitive and sticky products which are normally difficult to process.
• It is easy to integrate the classifier with milling plants in which the feedstock enters via the air stream.
• Cost-effective air re-circulation system as option, can operate without a filter.
• The classification efficiency can be optimized by the use of a second classifier for the coarse product, with inlet for secondary air.
• Bauermeister Air Classifiers are available in both carbon and stainless steel.
Model | Connected Load | Nominal Diameter | Total Height |
hp | mm | m | |
BM-ACL 0 | 5 - 7.5 | 450 | 1580 |
BM-ACL 1 | 10 - 15 | 550 | 1820 |
BM-ACL 2 | 15 - 20 | 700 | 2330 |
BM-ACL 3 | 20 - 25 | 800 | 2420 |
BM-ACL 4 | 25 - 30 | 925 | 2920 |
BM-ACL 5 | 30 - 40 | 1100 | 3600 |
BM-ACL 6 | 40 - 50 | 1500 | 4400 |